|The “Pilot Birdie Twin” with the cap removed. You see the ball point pin. |
Below the “Online Mini Touch red” with stylus pad screwed off.
Styli for capacitive sensors (touch screens) unfortunately need a certain diameter to emulate a human finger, say seven millimeters. The tip must be soft and smooth and electrically conductive. They have to be attatched to enough metal, in order to be “capacitive” enough for the sensor mechanism in the device.
The tip of this particular stylus can be screwed out. And then it (barely) fits into the cap of the Pilot Birdie pencil! All I did is file off the outer cover of the cap, and screw the stylus tip in.
The pilot pencil with the top (cover) half filed off.
The sleeve (cap, cover) hides a ball point pen.
The sleeve can be turned around to cover the pencil tip.You’ve then got a ball point pen instead of a pencil.
Here the top is filed off successfully. Blop.
I had to file off a bit of the thread of the stylus’ pad too, to make it fit (not shown).
And this is the result: A cap for the Pilot Birdie with capacitive stylus tip:
|Stylus type cap for the Pilot Birdie|
You’ve now got a pencil with three functions: 0.5 Millimeter pencil, ball point pen, touch screen stylus.
“Challenges”: The connection of the screw top and the sleeve might be too loose. Then glue or solder it. Also: You might loose the tip. Just be careful. I managed to loose the smooth cover a couple of times. And found “Pilot” so very friendly as to send me a couple of spares free of charge! Great company.
|The finished “product”, a small pencil (plus ball point pen) with capacitive stylus|
Permanent link to this entry: http://blogabissl.blogspot.com/2013/09/pilot-stylus.html
Contact Fritz@Joern.com for further details.
PS. Enjoy an ad for erasable ball point writing with “FriXion Ball” (specs here) courtesy of Pilot.